Ferrite Disc Adhesive Double Side Magnet

Jamag specialized in Ferrite Disc Adhesive Double Side Magnet  manufacturer for 10 years in China, we serve 4 years Double Side Magnet  for buyers all over the world, we seek and work on projects with you, always with our best quality/price.Feel confident working with us, we will be your best allies !   1, More Direct Information of Ferrite Disc Adhesive Double Side Magnet 1.1 The types of magnet we can supply   Ferrite Magnets have good anti-corrosion performance, no surface coating treatment needed. Ferrite is a kind of a ferromagnetic metal oxide. The electrical properties, the resistivity of the ferrite is higher than metal, alloy magnetic materials, and they have a high dielectric properties. Ferrite Magnet also reflected in the high frequency with high magnetic permeability. Thus, high-frequency ferrite weak areas have become widely used non-metallic magnetic materials. They are widely applied in speakers, cars, water pumps, disk drivers, starting motors, and electronic products.     1.2 Overview of our Ferrite Magnet   1.3 Close shot of our ferrite magnet samples 1.4 The Grade of ferrite magnet we can supply  

Grade	Br		Hcb		(BH)max
	T	Gs	KA/m	Oe	Kj/m3	MGOe
Y10T	≥0.20	≥2000	128-160	1600-2000	604-9.6	0.8-1.2
Y15	0.28-0.36	2800-3600	128-192	1600-2400	14.3-17.5	1.8-2.2
Y20	0.32-0.38	3200-3800	128-192	1600-2400	18.3-21.5	2.3-2.7
Y25	0.35-0.39	3500-3900	152-208	1900-2600	22.3-25.5	2.8-3.2
Y30	0.38-0.42	3800-4200	160-216	2000-2700	26.3-29.5	3.3-3.7
Y35	0.40-0.44	4000-4400	176-224	2200-2800	30.3-33.4	3.8-4.2
Y15H	≥0.31	≥3100	232-248	2900-3100	≥17.5	≥2.2
Y20H	≥0.34	≥3400	248-264	3100-3300	≥21.5	≥2.7
Y25BH	0.36-0.39	3600-3900	176-216	2200-2700	23.9-27.1	3.0-3.4
Y30BH	0.38-0.40	3800-4000	224-240	2800-3000	27.1-30.3	3.4-3.8

1.5 Magnetised direction     1.6 Physical performance of Ferrite Magnet  

items	mark	unit	vaues
Reply permeability	urec	Gs/Oe	1.05-1.3
Curie temperature	Tc	°C	450
Temperature coefficient of remanence	a(Br)	(%/°C)>	-0.18 — 0.20
Magnetization temperature of coercive force	a(hc)	(%°C)	-0.18— -0.20
density	d	g/cm3	4.5-5.1
Resistivity	P	Ω.cm	10
Coefficient of linear expansion	r	10-6 /°C	-8

  1.7 Manufacture Process 1.Dry process: By dry process, can produce isotropic & anisotropic magnets;the tool can be changed and developed easily.
2.Wet process: By wet process, only anisotropic magnets can be produced;it is complicated to change the tool and the tooling charge is much higher   1.8 Detailed Four Step Quality Control STEP 1: After the mould comes out. Test the size, tolerance and the property (BH(max), Br, Hcj, Hcb) of the mould, only the qualified products turn to next step.   STEP 2: After grinding, inspect the size and tolerance of the magnet with precision, only the qualified products turn to next step.   STEP 3: After cutting the thickness, examine the tolerance of thickness, guass and pull force, only the qualified products turn to next step.   STEP 4: Recheck the size and tolerance, surface of the magnet, exclude the unqualified (damaged, bad coating) pieces, then come to magnetizing and packaging.   2 More correspond Information of Ferrite Magnet   2.1 Package 2.2 Over 200 sizes moulds and Over 400 sizes stock   Please check a small part of our stock types of Neodymium Magnet in website attached document !   Notes: 1) We can also provide the other different thickness sizes according to you ! 2) We can also provide the other different middle hole sizes according to you !   3  Business and Economic Correspond Factor 3.1   Sample Policy   3.2 MOQ for formal orders

JAMAG-MOQ
types	below 12mm	below 25mm	above 25mm	special types
Disc	500pcs	200pcs	100pcs	500pcs
Block	500pcs	200pcs	100pcs	500pcs
Ring	500pcs	200pcs	100pcs	500pcs
Countersunk	800pcs	500pcs	200pcs	800pcs
Button	500pairs	500pairs	500pairs	500pairs
neocube	50sets	1000pcs	1000pcs	1000pcs

  3.3   Payment Terms   A) Large amount payment: L/C, D/A, D/P.   B) Fast payment below   4 Our Service Why Choose Jamag as your magnet product supplier: Fast reply, professional advise. 1) Prompt reply time: Office time (GMT+8), reply in 3 hours Off office time, reply in 12 hours 2) Fast and strict Quality control and Delivery control 3) ALIBABA qualified “Manufacture and Trading company”. 10 year magnet manufcture experience, 4 year magnet export experience. 5) Strong development capability of magnet with 3M glue, stainless steel hardware products, magnet with plastic products and other custom made magnet assembly. 6) Train service and timely feedback for mass production.

Contact us if you need more details on Double Side Magnet. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Double Sided Magnet、Magnet Double Side. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Magnet Sort by Material > Magnet with 3M adhesive